Pre-stretching operation firmly seat the chain parts evenly distributing the working load. It accurately establishes chain length and prevents elongating during the initial tun in period.

The riveting makes the pin connect firmly with plate and the chain more stable.The riveting area of the stainless steel short pitch roller chain is over 5% of the pin diameter. For the hollow pin stainless steel chain, the riveting area is over 3% of the pin diameter.

ZMIE stainless steel chain is made from high grades of rust-proof steel, these perform extremely well in environments that are acidic, alkaline, where direct contact with food is a consideration, where the chain will be exposed to water and for very high or very low temperature locations(-40° to +400°C), where resistance to corrosion is a requirement.

ZMIE can make carton as customer’s requirement, pack one lenght with 10FT or 5M into one carton, the packing cost depends on the quantity.

ZMIE supply stainless steel chain according to European standard, like 05B, 06B, 08B....., and ANSI standard, like 25A, 35A, 40A.....

Yes, we can offer the chain solution according to different conditioins. For example in corrosive conditions, we recommended the chain with nickel plated or use stainless steel chain. ZMIE has options, whatever your application environment!

Yes, zmie can print logo and chain no. on the 04B-SS chain.

Standard pitch sprockets by 30 teeth or over can be used with double pitch stainless steel chain.But using sprockets by 29 teeth or less will result in mispositioning of the chain pitch and sprocket teeth pitch.

Silicon sol lost wax casting is a typical investment casting process for stainless steel casting chain.Stainless steel casting chain 4103, 462,907-E51,CC100 are all made from silicon sol lost wax casting.Below is the advantages of silicon sol casting:a. The surface finish we could meet is CT5-6.So the surface of products looks very smooth.b. As the dimension accuracy is high,so there is no need ...

At this moment zmie haven't produced 06B1 with hollow pin yet, the hollow pin is starting from 08B1.

Usually most customers use stainless steel in food line.

Usually zmie use silicon melting for stainless steel casting chain.

Which stainless steel roller chain sizes come with spring clip connecting links? And which with cotter type?For standard stainless steel roller chain, the chain size down 16B/16A maybe come with spring clip connecting links.And the cotter type connecting links for up 20B/20A.

The main failure of the stainless steel chain is wear (both pins and bushings).The space between pins and bushings will be increased when the pins and bushings wear down, thus making the chain much longer than originally .

Usually our delivery time of stainless steel chain is 30 days after get customer order.

Yes, Zmie has been producing CC600 stainless steel chain for many years, CC600 is a casting chain.

Yes, ZMIE can supply stainless steel sheets, there have hot rolling and cold rolling are avaiable, and different thickness for your choice. For hot rolling the surface is not bright and smoothness, but the cost is lower. cold roller the surface is bright and smoothness, the cost is higher than hot rolling, can be directly used to make products.

Sure, it is available.

Yes, Zmie has started supplying stainless steel material in order to support customers produce stainless steel chains themselves .

For stainless steel transmission chain, there is almost no risk of fatigue failure when wear elongation is less than 1.5 %.For stainless steel conveyor chain, wear elongation should not exceed 2.0%.

Yes, Zmie has developed drop forged chain in stainless steel material recently.

Sometimes our customers inquire very few quantity of the stainless steel roller, we will check the material of the componets first, if we have the components in stock,of course the small quantity is acceptable.

AISI310 material chain can be against 900-1000℃ temperature.

The best use temperature range of stainless steel chain is -20℃~400℃. All basic components of this chain are made of stainless steel AISI304, which can be used in special environments such as underwater, acidic and alkaline applications.

Yes, Zmie has been producing 4103 stainless steel chain for many years. and have different dimensions for different usage. 4103 is a stainless steel casting chain.

Uswally, we don't add any oil and grease on stainless steel chain.The stainless steel chain was packed in plastic bags for clean and dust.

Generally, SUS304 and SUS316 are more popular.

ZMIE is produce standard roller chain like 06B, 08B, 10B and also produce OEM special stainless steel chain.

There are so many world famous chain manufacturers in the world, such as Tsubaki, Renold, Ketten Wulf, Iwis,Rexnord, Ewart, John King....etc. But there are very few ones Only focusing on producing Stainless Steel Chains, we are among those very few. Only focus on manufacturing Stainless Steel Chains.

Yes, ZMIE has a professional technical team for customize.